This 16" f/8 Truss Tube Ritchey-Chretien Telescope has 16" (406mm) of aperture and a focal length of 3250mm. The concave hyperbolic primary and convex hyperbolic secondary are made from low expansion quartz, and finished with a scratch-resistant highly reflective 99% dielectric coating for great contrast. The primary mirror is fixed in place in a metal mirror cell, and the secondary resides in a metal housing that can be collimated. Lightweight yet strong carbon fiber truss tubes have low thermal expansion characteristics. Shifts in focus due to temperature changes are minimized because of this design. The trusses are also designed to flex equally, keeping the optics in collimation regardless of the position of the telescope. The 16" Ritchey has three small cooling fans in the rear cell that help cool the inside of the tube down and bring it to ambient temperature so that you can start imaging sooner! The fans are powered by an external battery pack. This battery holder accepts 8-AA batteries (sold separately).
A Fixed Primary Eliminates Image Shift Schmidt-Cassegrain & Mak-Cassegrain telescopes achieve focus by moving the primary mirror back and forth inside the optical tube assembly, and this movement can cause image shift. While manufacturers have done a pretty good job of minimizing image shift on their telescopes, a moveable mirror makes it almost impossible to eliminate it completely. The Ritchey-Chretien has a primary that is fixed in place, removing the possibility of image shift and also the job of collimating the primary. Talk about versatility! Two Losmandy-style dovetails are attached to the truss tube support rings so that they ride at the top of the scope as well as at the bottom. A 3" dual-speed linear-bearing Crayford-style focuser rounds out this package. The ridged focusing knobs are easy to turn, even with gloves on, and the 10:1 microfocusing dial allows for very small changes, or tweaks, in focus. It takes ten turns of the microfocusing knob to equal just one turn of the larger knob. There is also a little knob on the bottom of the focuser that controls the tension, so that you can make adjustments depending on the weight or distribution of your load. The 3" opening steps down to a 2" compression ring adapter, and you will receive 1.25" compression ring adapter so that you can make use of all your eyepieces. Two 25mm and one 50mm extension tube is also included to help you match the back-focus requirements of your imaging equipment. This is one nice focuser, and due to its steel drive rail and other upgrades, you will find that it suffers from very little flexure, even under heavier imaging payloads.
16" f/8 Truss Tube Ritchey-Chretien Telescope
|Warranty||2 Year Warranty|
|Optical Tube Weight||77lbs|
|Optical Coatings||99% Dielectric|
|Tube Finish||Carbon Fiber Look|
|OTA Mount Type||Losmandy-Style Dovetail|